Welcome to Aldous Systems (Europe) Ltd

P8-PRO3232 Pro Audio 32X32 Elite Audio Matrix w/. Lip Sync Delay

More Views

P8-PRO3232 Pro Audio 32X32 Elite Audio Matrix w/. Lip Sync Delay
Zektor’s ProAudio™ Series – The Top Recommended DSP Preamp Audio Matrix For The Custom Installation Channel
Registered Trade Customers Only Can See Price
OR
Description

Details

VOLUME, BALANCE, BASS, TREBLE AND A 5 BAND GRAPHIC EQUALIZER ON EACH ZONE.

In many cases the need for an audio receiver can be eliminated by using the audio features of the ProAudio™. Audio and tone control are adjustable in 0.5dB steps, and all allow direct or relative adjustments (Ex: Set the volume to an absolute -12.5dB, or increase it by 3.0dB). The tone controls have a range of +/-20dB.

LIP SYNC DELAY

We provide up to 170ms of lip sync delay so that your audio/video matchup doesn’t look like a 1950’s Godzilla movie.

DIGITAL AUDIO, OPTICAL AUDIO, ALL AUTOMATICALLY CONVERTED TO ANALOG AUDIO.

It makes no difference whether your audio comes in through the analog inputs, digital coax inputs, or digital optical inputs, all inputs are converted to both analog and digital audio, and analog audio and digital audio are both available on the outputs. Digital is converted to analog. Optical inputs are available for the newer cable boxes that have only optical connections for their digital audio outputs.
Note: The ProAudio™ does not down convert DTS or 5.1 Dolby audio. When DTS or 5.1 Dolby audio is detected, it is passed straight through from the S/PDIF input to the S/PDIF outputs.  All of our ProAudio™  series product are in process of getting a design refresh to include Dolby 5.1 downmixing.

Note: Analog inputs cannot be directly converted to digital outputs. To convert analog to digital, a digital output can mirror an analog output.

VOLUME AND TONE CONTROLS WORK ON THE DIGITAL INPUTS AND OUTPUTS.

For the extreme in ultra-quiet audio and lowest possible distortion, by mirroring the analog outputs to the digital outputs, you can input and output digital audio, completely bypassing the analog sections. No extra conversions are done, and you still have volume, balance, bass, treble and 5 band equalizer controls available on each zone.

ADJUSTABLE GAIN SETTINGS ON EACH INPUT

To balance the different levels of audio coming from different pieces of equipment, each audio input has a full range gain adjustment. The adjustment range is: +24dB to -99.5dB, or full mute, in 0.5dB increments. You can have separate settings for each input, and a separate setting for analog and digital inputs.

STEREO TO MONO MIX DOWN FOR EACH ZONE

For hallways, and outdoor speakers, where stereo is not particularly useful, each zone can be mixed from stereo to mono using a variety of different methods.

CONTROL DONE RIGHT WITH K.I.S.S.™ (KEEP IT SIMPLE SERIAL™)

Available through the TCP/IP port, or the RS-232 port, Zektor’s K.I.S.S.™ is one of the easiest to use, serial port protocols, on the market. Yet the extensive bi-directional command set allows total control over the ProAudio.

FRONT PANEL WITH REMOVABLE RACK EARS

How frustrating is it when your product arrives from a manufacturer with no rack ears? Zektor ships all professional products with the rack ears integrated into the product or with removable ears. Unpack and install directly into the rack.

Specifications

Details

ANALOG AUDIO

• 32 inputs of stereo L/R
• 32 outputs of stereo L/R
• Freq. Response: 5Hz-20KHz @ +/-0.5dB
• S.N. Ratio: > 85dB, 5Hz-20KHz unweighted
• Input impedance: 10K ohms:

DIGITAL AUDIO

32 S/PDIF coax inputs
16 Optical inputs(w/ auto conversion)
32 S/PDIF coax outputs
Transfer Rates: 13.2Mb/S
Audio Modes: PCM,DD5.1,DTS,All modes
Coax Input Levels: 200mV-7.0V (PC card compatible)
Coax Output Level: 500mV nominal into 75 ohms
Digital PCM to analog conversion

DOORBELL / PAGING INTERFACE

Phoenix connector which can be setup to call 2 different entrance locations
Paging capability

CONTROL

Serial Port: 19200 8N1, USB Cable
Compatible
K.I.S.S.™, Upgradable Firmware
TCP/IP: Full Duplex 10Mbps
K.I.S.S.™, Raw TCP/IP Socket

POWER

Power Req.: 32 Watts
Mains Voltage: 100V-240V, 50Hz-60Hz, auto-sensing
Power Supply: Standard 3 prong IEC C14 connector
Dimensions: 5U 8.75″ H X 17″ W X 10″ D

RACK AND HARDWARE INFORMATION

• 4U high, 17 inches wide, 10 inches deep 7″ x 17″ x 10″
• Power LED indicators and front panel control
• Ships with removal rack ears installed

WARRANTY

3 year advanced shipment

FEATURES

Lip sync delay- up to 170ms per zone

Volume Adjustments in .5 db increments with ramping

Universal Volume Adjustment / Universal Mute

Mono Mix Down All Left / All Right / Stereo Mix Down

Silent Zone Presets

Bass -20db to +20db 0.5db steps

Mute (-110 dB) to -99.5 to +24 dB

Treble 5-band EQ

Digital to analog conversion 24-bit 48 kHz

Input Gain Control -24db to +24db

Output Gain Control -24db to +24db

Independent Zone Control Yes, all zones

Additional Information

Additional Information

SKU P8-PRO3232
Reviews
Downloads

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.