AN-220-SW-F-8-POE 220-series 8-port L2 Managed Gigabit Switch with PoE+

Araknis Networks^®220 Series Layer 2 Managed Gigabit Switch with Partial PoE+ and Front Ports

For installs that require PoE on a budget, opt for the Araknis 220 series switch. With it, you get a sizable power budget and full PoE+ capability on all ports, up to 30W. 1Gbps speed across all ports allows for powerful connectivity, while a user-friendly GUI and multiple mounting options ensure a quick and easy install. As with all Araknis switches, you have remote management capability via OvrC®. When it comes to operation, this switch has it all, including plug and play capability, multiple mounting options, and a sleek, 1U design. See how the 48-port, 24-port, 16-port, and 8-port models compare to the competition.

Fully Managed

Gigabit

Full Poe+

Multi-Mounting

Metal Housing

OvrC Enabled

Control4 Driver

Dual SFP Uplinks

Multi-Speed Fans

Even More OvrC Capability

With a new design and greater enhanced memory than found in previous generations, the Araknis 220 switch offers additional control via OvrC. With enhanced memory, the switch will automatically identify what device is connected to which port – and is future-ready for additional OvrC functionality as it develops!

Fully Managed

“Fully managed” means full control of the network. This switch provides a full Layer 2 managed solution with functionality to handle the most complex and robust installs.

Dual SFP Uplinks

Use this switch’s SFP ports to provide RJ45 uplinks to other devices, as well as fiber uplinks to extend the network over long distances while getting a stronger signal. Featuring a dedicated fabric, they don’t share a backplane with any other ports on the switch, which means you get a full 1Gbps and don’t have to sacrifice a dedicated PoE port to use them (no combo ports here!)

Improved GUI

A clear, concise GUI with simple VLAN and Link Aggregation setup makes install work a breeze. The improved GUI provides more information, performance data, and insight into switch performance including data transfer and power draw.

Plug and Play

Stop spending time on network configuration. Simply plug this switch in, and you’re ready to go. It’s as easy as that.

Ryft® LED & Mechanical Design

Both stylish and informative, these blue LED lights indicate power status, port speed (10/100 Mbps to 1Gbps), and link status. Plus, a redesigned faceplate is constructed with industrial materials, beveled edges, and a glossy finish, making for a clean design you’ll love to show off. You also get LED indicators on the rear RJ45 ports, so you can easily monitor each port's status.

Multi-Mounting

Mounting has never been easier. With its 1U design and available accessories, it easily mounts in a rack, on a wall, or anywhere in between. Included rack ears make for a sleek, left-justified design, while optional center-mount rack ears offer a more traditional look. (To order center-justified rack ears, visit the corresponding product page.)

Partial PoE

When you have a job that needs partial PoE, this switch has you covered. All ports have full PoE+ capability up to 30W with a more economical power budget, giving you an efficient switch at a modest price.

1Gbps Throughput

With a powerful 1Gbps throughput on all ports simultaneously, this switch can support the backbone of an install or simply act as a desktop add.

Specifications

	AN-220-SW-F-48-POE	AN-220-SW-F-8-POE
Rack Spacing	1U	1U
RJ-45 1000BASE-T Ports	48	8
SFP Uplink 1000BASE-X Ports	4	2
RJ45 Auto Negotiation	Yes	Yes
RJ45 Auto Sensing	Yes	Yes
Auto MDI/MDI-X	Yes	Yes
POE Ports	48	8
Flash Memory	32MB	16MB
SDRAM Memory	256MB	128MB
Packet Buffer	1.5MB	512KB
MAC Table Size	16K	8K
Switching Capacity	104Gbps	20Gbps
Forwarding Rate	77.4Mpps	14.8Mpps
PoE Features	802.3af/at Auto PD Classification Max Power Output per Port: 30W Max Simultaneous Power per Port: 8W	802.3af/at Auto PD Classification Max Power Output per Port: 30W Max Simultaneous Power per Port: 8W
PoE Power Budget	375W	65W
Power Features	Enable/Disable per port Priority Setting per port Overloading Protection per port PoE/1Gbps LED Toggle Setting PoE Power Withdraw Reading per Port Power level setting per port	Enable/Disable per port Priority Setting per port Overloading Protection per port PoE/1Gbps LED Toggle Setting PoE Power Withdraw Reading per Port Power level setting per port
L2 Features	Head-of-line blocking (HOL) Energy Efficient Ethernet (IEEE 802.3az)	Head-of-line blocking (HOL) Energy Efficient Ethernet (IEEE 802.3az)
Flow Control	802.3x, Back pressure	802.3x, Back pressure
Forwarding Mode	Store-and-forward	Store-and-forward
Spanning Tree	802.1D (STP) 802.1w (RSTP) 802.1s (MSTP)	802.1D (STP) 802.1w (RSTP) 802.1s (MSTP)
VLAN Features	802.1Q VLAN Group Port-based VLANs QinQ Protocol-based VLANs Voice VLAN	802.1Q VLAN Group Port-based VLANs QinQ Protocol-based VLANs Voice VLAN
Link Aggregation Features	Static, 802.3ad LACP Max Ports per group: 8 Max group: 8	Static, 802.3ad LACP Max Ports per group: 8 Max group: 8
Multicast Features	IGMP Snooping v1/v2/v3; MLD Snooping v1/v2 IGMP Querier IGMP Immediate Leave	IGMP Snooping v1/v2/v3; MLD Snooping v1/v2 IGMP Querier IGMP Immediate Leave
Storm Control	Broadcast/Unknown Multi-cast/Unknown Unicast	Broadcast/Unknown Multi-cast/Unknown Unicast
Jumbo Frame Support	9k	9k
QoS Features	Priority Queues: 8 queues per port Rate Limiting - Ingress: 1 Kbps/1 pps Rate Limiting - Egress: 1 Kbps/1 pps Scheduling: WRR, Strict Priority CoS: 802.1p, IP ToS Precendence, IP DSCP DiffServ (RFC2474)	Priority Queues: 8 queues per port Rate Limiting - Ingress: 1 Kbps/1 pps Rate Limiting - Egress: 1 Kbps/1 pps Scheduling: WRR, Strict Priority CoS: 802.1p, IP ToS Precendence, IP DSCP DiffServ (RFC2474)
Security Features	Port Security (MAC-based) 802.1x-PNAC (Port-based) IP Source Guard RADIUS HTTPS and SSL SSH v2.0 MAC Filter	Port Security (MAC-based) 802.1x-PNAC (Port-based) IP Source Guard RADIUS HTTPS and SSL SSH v2.0 MAC Filter
Management Protocols	CLI, Web, Telnet, Cloud-based Managed via OvrC	CLI, Web, Telnet, Cloud-based Managed via OvrC
Management Access Filtering	SNMP/Web/Telnet	SNMP/Web/Telnet
SNMP	v1,2c,v3	v1,2c,v3
DHCP	Client	Client
Event Log	local flash remote server	local flash remote server
Management Features	FW Upgrade: TFTP, HTTP Port Mirroring: One to One, Many to One sFlow SNTP Remote Ping LLDP (IEEE802.1ab) Cable Diagnostics UPnP Client RMON (1,2,3 and 9 groups) Dual FW Image	FW Upgrade: TFTP, HTTP Port Mirroring: One to One, Many to One sFlow SNTP Remote Ping LLDP (IEEE802.1ab) Cable Diagnostics UPnP Client RMON (1,2,3 and 9 groups) Dual FW Image
Dimensions (W x H x D)	17.32" x 1.73" x 16.22"	12.99" x 1.73" x 9.05"
Line Voltage	100-240V AC, 50/60 Hz	100-240V AC, 50/60 Hz
Power Consumption	Max: 481.40W Device: 48.90W BTU/h (max): 141.05	Max: 82.81W Device: 11.20W BTU/h (max): 24.26
Operating Temperature	32°F-122°F	32°F-122°F
Operating Humidity	10-90%	10-90%
Weight	13.4 lb	5.1 lb
Fan Noise	44.8 dBA (≥ 35°C @ 100%) 40.5 dBA (30-34°C @ 75%) 32.4 dBA (<29°C @ 50%)	Has fanless design