2N ACCESS UNIT M RFID 13.56 MHZ - with 3m Cable

Registered trade customers only can see price

SKU# :

9161121

SKU

9161121

This version of the 2N^® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

This version of the 2N^® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology. The reader supports NFC technology, so employees who don’t want to wear a card can use their mobile phone to gain access. Administer a unit remotely via the secure web interface or in the 2N^® Access Commander software.

Specifications

Power supply
Type	PoE and/or 12 V/1 A DC
PoE	802.3af (Class 0–12.95 W)
Interfaces
LAN	10/100 BASE-TX Auto-MDIX, RJ-45 male (2,9m pigtail)
Recommended cabling	Cat-5e or better
Active switch output	8 to 12 V DC/max 600 mA
Passive switch	NO/NC relay, 30V 1A AC/DC
Inputs	2 inputs – in passive / active mode(-30 VDC to + 30 VDC)
	OFF = OPEN or Uin > 1.5 V
	ON = CLOSED or Uin < 1.5 V
Tamper switch	native part of the 2N Access Unit M
Audio	buzzer, 1 W/8ohm
Supported protocols	DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog

RFID Card Reader
Supported frequencies	125kHz and 13.56MHz variant
125 kHz	EM4xxx
13.56 MHz	reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N^® Mobile Key)
	reads secured MIFARE^® DESFire^® EV2/EV3 cards using 2N^® PICard technology
Mechanical Properties
Frame	tempered glass with rugged plastic
Operating temperature	-40°C to +60°C
Storage temperature	-40°C to +70°C
Operating relative humidity	10%-95% (non-condensing)
Dimensions	50 (W) x 133 (H) x 27 (D) mm
	Flush installation box:
	40 (W) x 127 (H) x 68 (D) mm
	Surface mount box:
	27 (W) x 134 (H) x 52 (D) mm
Weight	max 0.5 kg
Cover rating	IP55 and IK07

Product Attachments Downloads