2N ACCESS UNIT M RFID MULTIFREQUENCY 125 kHz and 13.56 MHz - with 1m Cable

Registered trade customers only can see price

SKU# :

916114

SKU

916114

916114 2N ACCESS UNIT M RFID MULTIFREQUENCY 125 kHz and 13.56 MHz

The unit reads cards at frequencies of 125 kHz and 13.56 MHz. This comes in handy if you have several companies in one building, each of them using different cards and they share certain areas. It also includes a controller with full decision intelligence. All you need to install and power the unit is a single UTP cable. The customer saves money on readers and you save time on installation and configuration.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Parameters

Interfaces
Power supply:	PoE and/or 12 V/1 A DC
PoE:	802.3af (Class 0–12.95 W)
LAN:	10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling:	Cat-5e or better
Active switch output:	8 to 12 V DC/max 600 mA
Passive switch:	NO/NC contacts, up to 30 V/1 A AC/DC
Inputs:	2 inputs - in passive/active mode (-30 V to +30 V DC)
	OFF = open or Uin> 1.5 V
	ON = short-circuit or Uin< 1.5 V
Tamper switch:	native part of the 2N Access Unit M
Audio:	buzzer, 1 W/8ohm
Supported protocols:	DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies:	13.56 MHz variant
	125 kHz and 13.56 MHz variant
125 kHz:	EM4100, EM4102
13.56 MHz:	ISO14443A, ISO14443B, NFC support
	reads UID (CSN)

Mechanical Properties
Cover:	tempered glass with durable plastic
Operating temperature:	-40°C to +60°C
Storage temperature:	-40°C to +70°C
Operating relative humidity:	10%-95% (non-condensing)
Dimensions (surface mounted):	50 (W) x 133 (H) x 27 (D) mm
Weight:	max 0.5 kg
Cover rating:	IP55 and IK07

Product Attachments Downloads

Video