Axion COB LED Strip Tape RGBW IP65 Indoor/Outdoor - 5m

Axion Lighting 24-volt COB LED strips are the perfect solution for professionals looking to add RGBW accent lighting to any number of areas. Often used for:

• Soffits
• Accent lighting
• Back-lighting
• Stair lighting
• Shelf lighting
• Toe kick lighting
• Task lighting
• Under cabinet lighting
• Cove lighting
• Sign lighting

Strips can be quickly cut down to size and come with double-sided adhesive tape, adding to the ease of installation. They must be powered by a constant 24VDC.

For custom lengths, the LED strips can be cut where marked on the solder pads. Use 18-22 gauge wire or LED strip connectors to join multiple strips, however it is not recommended you exceed a total of 10 meters or 33 feet where possible to avoid voltage drop which may result in differing brightness from one end to the other.

If your application needs more than the maximum run length, you can wire strips in parallel (homerun the power back to the DMX controller instead of just adding to the existing strip. A 24-volt DC Power Supply is required to run these LED Strip Lights. Total the entire installed wattage and then adding 10-15% overhead. Brand-name Mean Well power supplies that have proven to last and deliver high quality for years and can also be purchased in our store.