916031 Fingerprint Access Unit 2.0

Features & Benefits

RELIABLE OPTICAL TECHNOLOGY

The fingerprint reader uses optical fingerprinting technology to read a fingerprint, ensuring reliable identification of the user when their finger is first applied to the reader.
INNOVATIVE AND FUNCTIONAL DESIGN

The access control unit is designed so that you can simply place your finger on the sensor without the need to press it down unnaturally.
FALSE FINGERPRINT DETECTION

A fingerprint is a user’s unique identifier which cannot be stolen, but can be copied. Our access control unit can detect such fake fingerprints.
2N^® REMOTE CONFIGURATION

Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
ADDING NEW FINGERPRINTS

Loading a new fingerprint is crucially important for correct evaluation during real use. For this reason, the user must have their finger scanned three consecutive times to guarantee an optimum match.
SIMPLE INSTALLATION

A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
WEB INTERFACE ADMINISTRATION

Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
TAMPER PROTECTION

2N^® Access Unit 2.0 Fingerprint Reader is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
MULTI-FACTOR AUTHENTICATION

Other expansion modules (an RFID reader, keypad, or Bluetooth) can be connected to the 2N^® Access Unit 2.0 Fingerprint Reader ensuring dual identification of users in areas with a high level of security.
ACOUSTIC AND VISUAL SIGNALLING

Acoustic and visual LED signalling located directly above the sensor indicate the fingerprint reader’s status.

Technical Parameters

Audio
Speaker:	0.8 W / 8 Ω
Interfaces
Power supply:	12 V ±15% / 2A DC or PoE
PoE:	per standard 802.3af (Class 0 - 12.95W)
LAN:	10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45
Recommended wiring:	Cat5e or better
Passive switch:	NC/NO contacts, max 30 V 1 A AC/DC
Active switch output:	8 to 12 V DC / max 550 mA
Inputs:	3 inputs – can be used in passive or active mode (-30 V to + 30 V DC)
Fingerprint reader
Sensor:	optical sensor protected by resistant glass
Reliability:	algorithm for fake fingerprint detection
Resistance:	resistant to water and dust
Ambient light suppression:	also works in direct sunlight
Signalling:	acoustic and multicoloured LEDs
Sensing area:	large with dimensions of 15.24 x 20.32 mm
Certification:	certified according to FBI standard

Expansion modules
Modules from the intercom 2N^® Helios IP Verso:	RFID card reader (125 kHz; 13.56 MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported
Mechanical properties
Frame:	Rugged zinc die-cast with surface finish
Operating temperature:	-20 °C – 55 °C
Operating relative humidity:	10 %-95 % (non-condensing)
Storage temperature:	-20 °C – 60 °C
Coverage level:	IP54
Mechanical resilience:	IK08
Dimensions:	Frame for surface mounting:
	- 1 module: 107 (W) x 130 (H) x 28 (D) mm
	Frame for recessing in wall:
	- 1 module: 130 (W) x 153 (H) x 5 (D) mm
	Box for recessing in wall (dimensions of minimum hole in wall):
	- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:	max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration)