DetailsThis thermostat contains a 240v relay to switch the heating off and on and talks back to the Omni Controller viw Zigbee. It provides current temperature and heatsetpoint to the Omni that can be set vioa the OT7 touchscreen or the app. This thermostat shows up under thermostats in PC Access.
Use this thermostat to replace a traditional thermostat for radiator based heating by simplky replacing the mechanical thermostat on the wall. This switches 240v to the 3 way valve making it a plug and play replacmenet.
Use this thermostat with under floor heating by poistioning the thermostat in the room and run a switched live back to the actuator for that room.
Use this thermostat with electric undefloor heating using the switched live to power the under floor heating matts.
In all situations full control is available via the Omni via Zigbee wireless communication.
Chip Ember EM357
Compatible IEEE 802.15.4
Stack EmberZnet 4.7.x (ZigBee PRO)
Wall mounting with screws
Frequency: 2405 MHz ÷ 2480 MHz
Nominal transmission power: 16 dBm
Reception sensitivity: 100 dBm
Internal antenna gain: 0 dB
Coverage outdoor/indoor: 100m/30m
2xAA 1,5V alkaline battery
Battery life: 18 months minimum
Auto/Manual/OFF operating mode (remotely configurable)
Heating/Cooling operating mode (remotely configurable)
Hysteresis: -/+0,25°C (remotely configurable only)
Temperature measurement: +6°C ÷ +40°C
Temperature resolution: 0,1°C
Temperature accuracy: ±1°C
Maximum load: 2A
Expected life: 100.000 cycles with resistive load
86 x 86 x 22 mm
Dimensions: 120x175x70 mm, weight: 290 g
Operating temperature: -10 ÷ +60°C; Storage temperature: -20 ÷ +70°C; Degree of protection: IP 30
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives
Product law applied
ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions
ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Safety
- Additional Information