B-900-MOIP-4K-RX Binary 900 Series 4K Ultra HD Media over IP Receiver
Support & Downloads >>>
Binary™ 900 Series 4K UHD Media over IP Receivers
Binary™ 900 Series 4K UHD Media over IP Receivers, when joined in a system with MoIP Transmitters and one MoIP Controller create a highly scalable, flexible IP media distribution system delivering visually lossless 4K UHD (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source stream and fast, simple firmware updates. MoIP Receivers also include an integrated video scaler, allowing 4K source content to be simultaneously distributed to both 4K and 1080p displays, plus audio breakout. Lastly, RS-232-over-IP, 2-way IR routing and custom drivers for popular control systems provide tremendous flexibility in system design.
OvrC is your remote on-call technician, a free cloud-control app that makes installs a breeze and helps eliminate truck rolls. Plus, a convenient, end-user app allows your customers to fix small problems on their own, reducing calls and making your life easier.
Visually Lossless 4K Video
MoIP encodes video up to 4K UHD using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).
Mixed 4K & 1080p Sources and Displays
Traditional matrix switchers force you to downgrade all source content to the lowest video quality that will work on all displays. Whether your customer is moving to a full, 4K system now or upgrading from 1080p to 4K over time, MoIP provides the custom solution that fits their budget, without compromising quality.
Impressive Video Walls
Group 4, 9, or even 16 displays together to create amazing video walls. Configuration takes only a minute, without the need to program each device. The result is a new “virtual” receiver, so you simply select the desired source, making control integration a breeze.
Limitless Control Options
Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. Two-way IR routing can be configured from any TX to any or all RX(s), reducing the number of IR outputs required from the control system (no dongles needed). For RS-232 control, commands are sent via IP and generated at each endpoint. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.
Control System Integration
Our engineers have written drivers for the industry’s leading control systems, including Control4, Crestron, ELAN, URC and more – so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization – and we’ve even provided the MoIP controller’s API to create your own drivers if needed.
The Binary MoIP Difference
The Fastest, Simplest Solution
Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch, so you don’t need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less. View the recommended 210 series and 310 series PoE switches.
Flexible & Scalable
The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client’s specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.
Ultra-Reliable, Ultra HD
With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K UHD). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K UHD). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.
The Power of OvrC
Binary MoIP delivers something no other media product can – award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.
|Video Features||Integrated Video Scaler: Yes (4K, 1080p) Interlaced Video Support: Yes HDR Support: HDR 20/24Hz (8bit) Video Wall Support: Yes, 2x2, 3x3 and 4x4 Video Compression: Visually Lossless Max. HDMI Bandwidth: 8.91Gbps Max. HDMI Pixel Clock: 2|
|Transmitter Video Resolution||Up to 4K UHD@60Hz 4:2:0 | 4K HDR@30Hz | 4K UHD@30Hz 4:4:4 8bit Plus Full 1080p HD and lower resolution including interlaced video formats|
|Receiver Video Resolution||Up to 4K UHD@30Hz 4:4:4 8 bit HDR Content when available 4K HDR@30Hz 8 bit Integrated scaler to support 4K|HDCP 2.2 on 1080p|HDCP 1.4 displays|
|HDMI Connections||IN: N/A OUT: 1 x 19-pin Type A Female|
|Color Depth||8, 10, 12bit|
|Supported Audio Formats||2CH PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, Dolby Atmos, DTS, DTS-HD Master Audio, DTS NeoX|
|Audio Features||Audio Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Audio Bit Depth: up to 24-bit|
|Audio Inputs / Outputs||Audio In: NA Audio Out: 1 x L/R RCA Audio Analog Audio In: No Analog Audio Out: Yes|
|Control Features||TX/RX Switching: via MoIP Controller 2-Way IR Routing: Yes, independent of video|
|IR Signal Frequency||20-60 kHz|
|IR Inputs||1 x 3.5mm Stereo (blue), 12V|
|IR Outputs||1 x 3.5mm Stereo (green)|
|System Configuration||Supports single switch deployments: Yes Supports multiple switch deployments: Yes (multiple gigabit uplink required) On-screen Device Identification: Yes Auto Device Discover: Yes|
|DipSwitch 1 Controls||IR RCVR PWR OFF/ON|
|DipSwitch 2 Controls||Serial/RS-232 DTE/DCE|
|RS232 Control Desc.||RS-232 over IP|
|RS-232 Ports||1 x RJ-45 (EIA-561)|
|Networking Features||Required Managed Switch: Layer 2 Managed w/ IMGP Snooping Req. Port Throughput: 1Gbps Max. Distance from Switch: 100m (328 ft) Compatible Category Cable: CAT 5E/6/6A/7|
|Bit Rate||150-300 Mbps (Avg) 850 Mbps (Max)|
|Ethernet Ports||1 x RJ45 (T568B) LAN + PoE|
|Latency||1 frame (16ms - 60Hz, 33ms - 30Hz)|
|Ethernet Pass Through 10/100Mbps||10/100/1000 Mbps|
|IP Address||Assigned by controller|
|Operating Humidity||20-90% RH (no condensation)|
|Dimensions (W x H x D)||w/o rack ears: 6.7" x 0.83" x 4.72"|
|Certifications||CE, FCC, RoHS|
|Included Accessories||Mounting ears, Mounting ear screws, Rubber feet|
|Power Consumption||12VDC 2A (optional accessory)|
|PoE Consumption||7.5 Watts (Max)|