9160342 RFID Access Unit 2.0 (13.56 MHz / NFC)

Registered trade customers only can see price
SKU# :
9160342
SKU
9160342

The 2N® Access Unit 2.0 RFID is an IP access unit based exclusively on IP technology. It combines the functions of a traditional door controller and an RFID reader. Reads cards with 13.56 MHz frequencies.

  • Minimum wiring requirements
  • Same design as IP intercoms

Features & Benefits 

  • MINIMUM WIRING REQUIREMENTS
    A single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
  •  
  • SAME DESIGN AS IP INTERCOMS
    The access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
  •  
  • NFC SUPPORT
    Thanks to wireless NFC technology, you can easily open the door using a smartphone with the 2N® Mobile Key application installed.
  •  
  • ADVANCED EVENT REPORTING
    The 2N® Access Unit 2.0 RFID not only allows logs to be sent to the Syslog server, but also e-mail notifications to building security or an HTTPs command to a third-party system for selected events.
  •  
  • MONITORING ENTRANCES AND EXITS
    Other expansion modules (e.g. an exit RFID reader, keypad, or Bluetooth etc.) can be connected to the 2N® Access Unit 2.0 RFID, allowing you to secure a door easily from both sides.

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
  OFF = open or Uin> 1.5V
  ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies: 13.56MHz variant
13.56MHz: ISO14443A, ISO14443B, NFC support
  reads UID (CSN)
  reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
  - 1 module: 107 (W) x 130 (H) x 28 (D) mm
  Flush mounting frame:
  - 1 module: 130 (W) x 153 (H) x 5 (D) mm
  Flush mounting box (minimum hole):
  - 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
  2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.

Technical Parameters

Audio
Speaker: 0.8 W / 8 Ω
Interfaces
Power supply: 12V ±15% / 2A DC or PoE
PoE: per standard 802.3af (Class 0 - 12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45
Recommended wiring: Cat5e or better
Passive switch: NC/NO contacts, max 30 V 1 A AC/DC
Active switch output: 8 to 12 V DC / max 550 mA
Inputs: 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC)
RFID card reader
Supported frequency: 13.56MHz & 125 kHz
Supported 13.56 MHz cards (only the serial number of the card is read - UID): ISO14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX, Ultralight, Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic Advant
ISO14443B: Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K, PicoPass, HID iCLASS
Supported NFC devices: smartphones with NFC (HCE support required) and the 2N® Mobile Key application, only for Android 4.3 or higher
Supported 125 kHz cards: EM4100, EM4102, HID Prox
Expansion modules
Modules from the intercom 2N® Helios IP Verso: RFID card reader (125kHz; 13.56MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported
Mechanical properties
Frame: Rugged zinc die-cast with surface finish
Operating temperature: -40°C – 60°C
Operating relative humidity: 10%-95% (non-condensing)
Storage temperature: -40°C – 70°C
Coverage level: IP54
Mechanical resilience: IK08
Dimensions: Frame for surface mounting:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Frame for recessing in wall:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Box for recessing in wall (dimensions of minimum hole in wall):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration)
More Information
SKU 9160342
Warranty 3 Year Warranty
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
More from 2N
  1. 91379032 Access Commander 2.0 Basic to Pro License
    91379032 Access Commander 2.0 Basic to Pro License
    Registered trade customers only can see price
  2. 91379031 Access Commander 2.0 Basic to Advanced License
    91379031 Access Commander 2.0 Basic to Advanced License
    Registered trade customers only can see price
  3. 91379033 Access Commander 2.0 Basic to Unlimited License
    91379033 Access Commander 2.0 Basic to Unlimited License
    Registered trade customers only can see price
  4. 91379036 Add on Attendance Monitoring License
    91379036 Add on Attendance Monitoring License
    Registered trade customers only can see price
  5. 91378803 Surface Mounted Back Box for Indoor Compact & View
    91378803 Surface Mounted Back Box for Indoor Compact & View
    Registered trade customers only can see price
  6. 91379034 Access Commander 2.0 Advanced to Pro License
    91379034 Access Commander 2.0 Advanced to Pro License
    Registered trade customers only can see price
  7. 91379035 Access Commander 2.0 Pro to Unlimited License
    91379035 Access Commander 2.0 Pro to Unlimited License
    Registered trade customers only can see price
© 2017-2024 Aldous Systems (Europe) Ltd. All Rights Reserved.