9155401CB-E Verso LTE Main Unit with Camera and Int. Antenna - Black

Registered trade customers only can see price
SKU# :
9155401CB-E
SKU
9155401CB-E

9155401CB-E (BLACK)
2N® LTE Verso combines minimum installation costs with a full-feature set. Using LTE technology means no other cable apart from a power supply is needed, with a benefit of all functionalities such as a video communication. The main unit with HD camera can be accompanied by RFID reader, Bluetooth or Fingerprint reader supporting modules.
Technical Support >>

2N LTE Verso Base Unit with Camera (Black) - Requires 9155048 if adding any additional modules



 

Features & Benefits

  • Ideal retrofit solution
    Thanks to LTE connection 2N® LTE Verso does not depend on available wiring. Together with 2N® Mobile Video service it offers full range of features like video calls to mobile devices and 2N answering units just like wired intercom.
  • Secure configuration via cloud
    Connect 2N® LTE Verso to the LTE network and then add your intercom to the 2N® Remote Configuration on My2N.com portal to configure all its features from anywhere in the world via secured VPN connection.
  • Pick any of the 14 modules available
    2N® LTE Verso is using the same standard module connection as 2N® IP Verso and therefore any of the additional modules can be connected to it, e.g. RFID reader, Bluetooth or Fingerprint reader. Choose a module with technology that suits you the most.
  • Minimum installation costs
    The LTE intercom doesn’t need any cables except the power supply and therefore it’s an ideal solution for retrofit in older buildings where an additional wiring installation would be uneconomical.
  • Calls to mobile phone and tablet
    2N® LTE Verso allows you to call a mobile phone or tablet over the cellular data in case, that even these mobile devices are connected to the Internet.
  • Bluetooth technology
    Thanks to the Bluetooth module and 2N® Mobile Key app you don´t need to search your RFID cards or remember PIN code anymore. Simply use your smartphone for your identification.
  • Mobile credentials for free
    Unlike our competitors, 2N offers mobile credentials via Bluetooth for free. Do not pay 6-10USD per each credential or any other fees. Simply install 2N® Mobile Key app and start to use your phone to open the door!
  • Touchscreen display
    The touchscreen display has all the functions of a mechanical keypad and it also offers structured contact list. It is water resistant, vandal resistant and easy to read even in direct sunlight.
  • Fingerprint reader
    Provide maximum access security for your building using modern, completely secure, and reliable access technology combined with luxury design.
  • Intuitive controls and search
    Create an intuitive and structured contact list similar to that in your mobile phone. Discover its luxury design and intuitive controls and search.
  • Access control
    Achieve a greater level of security for all those at its location. 2N® LTE Verso makes it easy to prevent the entry of unauthorized persons.
  • Modularity
    The modularity of this LTE intercom allows you to configure it to your requirements. Select the specific module, accessories and configurable functions.
  • Camera with night vision
    See who is standing in front of your door, even in total darkness. Moreover, the camera is hidden from normal view. The intruder has no clue they’re being monitored.
  • Suitable for the disabled
    The device can be fitted with an induction loop and pictograms suitable for communication with the hearing impaired.
  • SIP support with no server needed
    SIP protocol support makes it easy to link the intercom with IP phones and PBX from other producers, without having to connect to the server.
  • Touch keypad
    A highly sensitive touch keypad reliably records and evaluates every touch and ensures access to the building via the entered PIN.
  • Picture to email
    2N® LTE Verso allows you to email snapshots of the visitor captured by the camera at the time of the call.

Technical Parameters

Signalling protocol
SIP 2.0 (RFC - 3261)
Buttons
Buttons: transparent buttons with white backlight and easily removable label
Number of buttons: 1 to 146
Numeric keypad: optional
Audio
Microphone: 1 built-in microphone
Speaker: 2 W
Sound pressure at 1 kHz at 1 m distance: 78 dB
Audio stream
Codecs: G.711, G.729, G.722, L16/16kHz
Camera
Resolution – JPEG: 1280 x 960 px
Resolution – video call: 640 x 480 px
Viewing angle: 120° (H), 90° (V), 145° (D)
Night vision: yes
Video stream
Codecs: H.263+, H.263, H.264, MJPEG, MPEG-4
Touchscreen (optional)
buttons and keyboard functions
Bluetooth module (optional)
Bluetooth Smart technology
Security: RSA-1024 and AES-128
RFID card reader (optional)
Supported frequencies: 13.56 MHz & 125 kHz
Support for NFC: yes, HCE and the 2N® Mobile Key application needed
Fingerprint reader (optional)
Sensor: optical sensor protected by resistant glass
Reliability: algorithm for fake fingerprint detection
Resistance: resistant to water and dust
Ambient light suppression: also works in direct sunlight
Status signalisation: acoustic and with the aid of multicoloured LEDs
Sensing area: large with dimensions of 15.24 x 20.32 mm
Operating temperature: -20°C to 55°C
Certification: FBI PIV
Interfaces
Power supply: 12V ± 15%/ 2A DC
Network connection: LTE FDD Cat.1, 3GPP release 9 compliant 4G Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800)
output power - Class 3 (0.2 W, 23 dBm) @ LTE
Connection speed: uplink up to 5 Mbps
downlink up to 10 Mbps
Switch output: NC/NO contacts, max 30 V/1 A AC/DC
Active switch output: 8 to 12 V DC depending on power supply (source voltage minus 2 V), max 400mA
Supported protocols: SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog
Mechanical properties
Operating temperature: -40°C – 60°C
Storage temperature: -40°C – 70°C
Operating relative humidity: 10% – 95% (non-condensing)
Officially certified outdoor coverage level: IP54, IK08, touchscreen IK07
Surface mounting frame - dimensions
1 modul: 107 (W) x 130 (H) x 28 (D) mm
2 moduls: 107 (W) x 234 (H) x 28 (D) mm
3 moduls: 107 (W) x 339 (H) x 28 (D) mm
Flush mounting frame - dimensions
1 modul: 130 (W) x 153 (H) x 5 (D) mm
2 moduls: 130 (W) x 257 (H) x 5 (D) mm
3 moduls: 130 (W) x 361 (H) x 5 (D) mm
Flush mounting box (minimum hole dimensions)
1 modul: 108 (W) x 131 (H) x 45 (D) mm
2 moduls: 108 (W) x 238 (H) x 45 (D) mm
3 moduls: 108 (W) x 343 (H) x 45 (D) mm
More Information
SKU 9155401CB-E
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
More from 2N
  1. 9155301BF IP Solo without Camera Flush Mount | Black
    9155301BF IP Solo without Camera Flush Mount | Black
    Registered trade customers only can see price
  2. 9155013 Flush Installation Frame for 3 Helios IP Verso Modules - Brushed Nickel
    9155013 Flush Installation Frame for 3 Helios IP Verso Modules - Brushed Nickel
    Registered trade customers only can see price
  3. 9155301BS IP Solo without Camera Surface Mount | Black
    9155301BS IP Solo without Camera Surface Mount | Black
    Registered trade customers only can see price
  4. 9155902C-1 Verso/Solo Camera Window (Camera Version)
    9155902C-1 Verso/Solo Camera Window (Camera Version)
    Registered trade customers only can see price
  5. 9155301S IP Solo without Camera Surface Mount | Brushed Nickel
    9155301S IP Solo without Camera Surface Mount | Brushed Nickel
    Registered trade customers only can see price
  6. 91550941 2N Helios IP Verso - 125kHz RFID Reader
    91550941 2N Helios IP Verso - 125kHz RFID Reader
    Registered trade customers only can see price
  7. 9155301F IP Solo without Camera Flush Mount | Brushed Nickel
    9155301F IP Solo without Camera Flush Mount | Brushed Nickel
    Registered trade customers only can see price
© 2017-2024 Aldous Systems (Europe) Ltd. All Rights Reserved.